Purefexion Wipes are a game - changer in disinfection. These easy - to - use wipes offer strong protection against pathogens without the harsh, irritating effects of other chemical disinfectants.
### Features & Benefits
- **Powerful Disinfection**: Kills 99.9% of household germs, gets rid of odor - causing bacteria, and sanitizes in just one minute. With low pH, it has virucidal, germicidal, fungicidal, and tuberculocidal efficacy. It's also effective against antibiotic - resistant organisms and Norovirus.
- **Non - Irritating**: Free of quats and bleach, with an EPA category IV (lowest toxicity level). No need for precautionary statements or PPE. It won't irritate your skin, eyes, or lungs, and its highly biodegradable ingredients leave no harmful residues.
- **One - Step Cleaning & Disinfection**: Works well even in the presence of 5% organic soil load. Only a 5 - minute contact time is needed for disinfection, and no pre - cleaning or post - rinsing steps are required.
### Certifications
It's an EPA DfE - Certified Product with a 100% biodegradable substrate. It meets OSHA requirements for bloodborne pathogens, has HMIS ratings of '0', and is EPA List N approved for use against SARS - CoV - 2.
### Usage
These wipes are for hard, non - porous surfaces like stainless steel, chrome, glass, plastic, and vinyl. A two - step cleaning process before disinfection is only needed when surfaces are very dirty or may be contaminated with blood or body fluid. Purefexion Wipes can handle both cleaning and disinfecting jobs.
Hey there! Here's how to use your Purefexion Disinfectant Wipes. First off, these wipes are for cleaning surfaces, not for your skin. Always wear gloves when you're cleaning. If you're dealing with a large body fluid spill, put on a cover gown and face protection too.
When you're taking a wipe out of the container, pull it at a 90° angle and make sure it's between the two arrows on the lid. This way, the wipes will separate easily at the perforation.
For regular hard, non - porous surfaces like stainless steel or glass, unfold the wipe and wipe the surface until it's visibly wet. Let the solution air dry. Don't wipe the surface dry before the proper contact time. Even if the surface seems dry, there's still some moisture left to kill all the bacteria.
If you're cleaning equipment and cords, start at the connectors. Wet the cables but don't soak them. Sometimes you may need to wring out the wipe to avoid too much fluid on the cables. Let the solution on the cables air dry. Make sure no solution drips into the cord connectors. If there's pooling at the connectors, wait for the right contact time and then dry them before using the equipment again.
After the contact time, you can wipe or rinse off any residue from shiny surfaces if needed. And don't forget to keep the small center cap of the container closed to stop the wipes from drying out.
A two - step cleaning process (cleaning before disinfection) is only necessary when the surfaces are really dirty or there's a chance of blood or body fluid contamination. Other than that, these wipes can do both cleaning and disinfecting jobs for you.
