This award-winning, unique light therapy device offers three treatment options and the largest treatment area. Your clients can enjoy medical-grade light therapy at home. They can choose anti-aging, acne treatment, or both at once. Besides anti-aging and acne treatment, the powerful infrared (IR) LED lights in the dpl IIa help with skin healing and recovery. They also reduce damage from sunburn, bruising, cuts, scrapes, and acne scars. Features & Benefits: - FDA-cleared OTC Class II medical device - Medical-grade LEDs (880nm Infrared, 660nm Deep Red, 630nm Red, 605nm Amber, 415nm non-UV Blue) - Three powerful treatment settings (Anti-Aging, Acne, Anti-Aging & Acne combination) - Safe for all skin tones - The treatment area is 10”x14”. Setting 1: Anti-Aging - Reduces wrinkles and fine lines - Minimizes smile and frown lines - Improves skin tone. Setting 2: Acne Treatment - Reaches deep to destroy acne-causing bacteria - Reduces future acne and potential scarring - Calms redness and inflammation. Setting 3: Both Anti-Aging & Acne Treatment - Combines the benefits of both settings - Saves time - Maximizes results. Usage: This LED therapy panel is easy to use, and treatment takes just a few minutes daily. 1. Wash and dry the area before use. 2. Attach the power supply. 3. Plug it into a wall outlet and turn on the device. 4. Wear the provided goggles when treating the face. 5. Press the power button once for wrinkle treatment, twice for acne treatment, and three times for all lights. 6. Place the device over the desired treatment area for 3 minutes. 7. The device will auto-shut off after 3 minutes. 8. Move to the next area and repeat steps 5 and 6. 9. Don't block the ventilation holes. 10. Use daily for best results, but don't exceed 3 treatments per day per area. Troubleshooting: If the dpl IIa Panel device doesn't turn on, check if the power supply is firmly in the outlet, try a different outlet, make sure the power cord is firmly in the handle, and check if the On/Off button is on. If it shuts off before 3 minutes, ensure the ventilation holes on the back aren't covered. If some lights seem off, the Infrared (IR) lights are invisible to the human eye. If red lights are on, the device is working properly.
Using this light therapy panel is a breeze. First, clean and dry the area you want to treat. Then, attach the power supply and plug it into a wall outlet. Turn on the device. When treating your face, put on the goggles provided. Press the power button once for anti-aging treatment, twice for acne treatment, and three times to use all the lights. Place the device right over the skin of the treatment area for 3 minutes. The device will turn off by itself after 3 minutes. Move it to the next area and repeat the button - pressing and placement steps. Remember, don't block the ventilation holes on the back of the device. Use it every day for the best results, but don't do more than 3 treatments a day on each area. If the device doesn't turn on, check the power supply connection to the outlet and the handle, and make sure the On/Off button is on. If it shuts off too soon, check the ventilation holes. And don't worry if some lights seem off, the infrared lights are just invisible to our eyes. As for maintenance, keep it clean and dry, and store it in a safe place when not in use.
